Recently Posts

Cannot install pyqt5 for python3.4 on windows 10

I wish this helpful for you You can download your answer from here:https://sourceforge.net/projects/pyqt/files/PyQt5/PyQt-5.4.1/

» python

Date : November 24 2020, 03:01 PM , By : Tanya Singh

How do I create FFI bindings to C functions expecting OR-ed bytes?

hop of those help? The problem is that C's enum and Rust's enum are very different things. In particular, C allows an enum to have absolutely any value whatsoever, whether or not that value corresponds to a variant.Rust does not. Rust relies on enums

» rust

Date : November 24 2020, 03:01 PM , By : dennisnguyen

How Remove Recycler Separator/divider programmatically or using xml property

I wish this helpful for you Below line making trouble. Because you are adding decoration to your item. This will add divider to your view. Just comment out below line.

» java

Date : November 24 2020, 03:01 PM , By : Sankalp Mehta

Gravity Problems

I think the issue was by ths following , I've been trying to make a code with pygame to simulate simple gravity. At the moment, there is only one object (HOM) which is orbiting the sun. However, for reasons unknown to me, whenever I run the code, HOM

» python

Date : November 24 2020, 03:01 PM , By : Mahi

Upgrading passenger to 5.1.11 breaks setup with 403

it should still fix some issue Edit: you mentioned your OS is 17.04 and not 17.10. Phusion's instructions for 17.04 tell you to remove nginx-extras, not to install it (as you say you've done).So, for 17.04, try removing nginx-extras, then installing

» ruby-on-rails

Date : November 24 2020, 03:01 PM , By : yourpain

Add jitter to box plot using markers in plotly

Does that help I find myself in the same potential case often with plotly and ggplot2-- 3 lines of code to get 90% of what I want, and 30 lines of code to get the aesthetics just right.One potential solution/workaround: Take advantage of R's "factors

» r

Date : November 24 2020, 03:01 PM , By : Kapil

Where to position `import` modules inside an class?

This might help you You misunderstand the scope of import . Firstly, It's PEP practice to put module on the top, secondly and most importantly, it's not about best practice,it works that way. Every time You import any class or function from your file

» python

Date : November 24 2020, 03:01 PM , By : AKHIL PB

Angular View Showing Wrong Result

wish help you to fix your issue You are missing a , in this line: pubdate: new Date('2011', '02' '18'). It should be pubdate: new Date('2011', '02', '18'). Also, I suppose you added ** to highlight the code in the question. If not, it should not be t

» angularjs

Date : November 24 2020, 03:01 PM , By : Mete

Parse php json to javascript

like below fixes the issue If you're using jQuery: $.parseJSON().If you're using plain javascript: JSON.parse()

» javascript

Date : November 24 2020, 03:01 PM , By : Kevin Hadinata

If loop with 4 outcomes

I wish this help you Edited: removed my original answer, addressing issues with asker's implementation based on my original answerThe problem

» excel

Date : November 24 2020, 03:01 PM , By : Josh

ADD a existing API without server downtime

I hope this helps . Yes, it is possible. You can replace the existing API configuration in the deployment folder or the CAPP (If you used capps to deploy the api) and you do not need a server restart to apply changes.

» wso2

Date : November 24 2020, 03:01 PM , By : shubham

Service Fabric "Waiting for upgrade..." using VSTS

I think the issue was by ths following , OK, I've managed to fix this. This was happening because there is a PreUpgradeSafetyCheck that happens before rolling out an upgrade. This is not relevant for a single node cluster as downtime is inevitable fo

» development

Date : November 24 2020, 03:01 PM , By : sightseeingpass

How to convert an IndexedTable to a DataFrame in Julia?

I wish this help you In a quick explanatory work, IndexedTables seem much faster than DataFrames to work on individual elements (e.g. select or "update"), but DataFrames have a nicer ecosystem of functionalities, e.g. plotting, exporting.. , The foll

» development

Date : November 24 2020, 03:01 PM , By : user7456068

Write to Internet Explorer javascript console with vba in excel

With these it helps i'm trying to send a simple http post request. It works perfectly fine if I send it via the Internet Explorer console using ajax, but i'm having problems doing it in VBA. I've identified that the problem is the proxy server of the

» javascript

Date : November 24 2020, 03:01 PM , By : Rad

How to handle images in a Rails / Webpacker / React app?

Does that help I'm using webpacker with rails 5.1.4 to play with Reactjs, Redux, and react-router-dom. , Just edit the file config/webpacker.yml and replace this line:

» ruby-on-rails

Date : November 24 2020, 03:01 PM , By : Six

ZXing not calling onActivityResult, When scanning QR Code

may help you . The problem with this code is that I had used android:noHistory="true" on ScanActivity in the manifest file

» android

Date : November 24 2020, 03:01 PM , By : Anonymous101

How to view first image in list per user as its highlight Profile

Hope that helps you are looping on all results of your query, so of course you will get all images. Your query is to generic. Now I assume your table is something like this:

» php

Date : November 24 2020, 03:01 PM , By : Jar Jafar

Adding an extra item to the legend

fixed the issue. Will look into that further Add dummy aes() to geom_point - for example fill that is named significant aes(fill = "Significant").

» r

Date : November 24 2020, 03:01 PM , By : Syed Zain Shah hamda

Remove multiple licenses via Azure AD v2 powershell

seems to work fine I want to remove multiple licenses using PowerShell. Actually I able to remove single licence like below. But How do I remove multiple licenses? , But How do I remove multiple licenses?

» powershell

Date : November 24 2020, 03:01 PM , By : kenlo412

Python OpenCV: Cannot resize image

Hope this helps OpenCV uses NumPy arrays as the fundamental datatype to represent images. Indeed NumPy has a resize method to "resize" the data, but you're not using it properly. By consulting the documentation, the numpy.resize method requires you t

» python

Date : November 24 2020, 03:01 PM , By : Prashant

Mvc5 pass model to Layout Page

Hope that helps Looks like a good usecase to use a ChildAction which can be called from the layout view.So start by creating a view model to represent the data

» development

Date : November 24 2020, 03:01 PM , By : Abilashini. T

Definition of Conditional NET452 in sharpsnmplib?

To fix the issue you can do That conditional define only has the scope of its own project (a .NET Standard class library that targets net452 and others).Thus, when your project consumes the library via NuGet or project reference, the net effect is ju

» .net

Date : November 24 2020, 03:01 PM , By : Hatkar

V & H center img and text on the same line in 3 column table

I wish did fix the issue. You should use flexbox to get what you want. Here is a good intro: https://css-tricks.com/snippets/css/a-guide-to-flexbox/If you want to make it completely dynamic, it'll get more complicated. If you know how many items you

» image

Date : November 24 2020, 03:01 PM , By : ahmet canimcan

Print on the same spot in IPython console

I wish did fix the issue. I wrote this before the edit with IPython console, so I am not sure if this is a solution that works there or not, but here it its:Instead of using the print() command, i would instead try to use sys.stdout.

» python

Date : November 24 2020, 03:01 PM , By : Lakshmanan C B

2 Forms with Jquery

this will help First of all you call updateSingleOptionSelector_0_2() without a value and i think you throw an error there. This might be the reason other listeners doesn't work.On the other hand change function works as expected.

» javascript

Date : November 24 2020, 03:01 PM , By : Safal Trading

Assembly TASM: Multiply 4 digit numbers by 4 digit numbers

seems to work fine I am trying to create a calculator program using Assembly Language but it is required for us to show 4 digit number operations. ,

» assembly

Date : November 24 2020, 03:01 PM , By : catto

Not Able to Save Data Hibernate

this one helps. First, I guess many employees belong to the same department, so it should be a ManyToOne. Second, you can use JoinColumn to specify the name of the ... join column:

» java

Date : November 24 2020, 03:01 PM , By : Vikas

Toolbar addView not working

will help you The easiest way to do this is by taking the whole layout item_toolbar_main and set it in a Toolbar directly in xml without using any Java code. So change the Toolbar view in your layout activity_main.xml to something like this:

» java

Date : November 24 2020, 03:01 PM , By : Yogesh Kumar

Why the loop stops right in the middle?

will be helpful for those in need You are deleting the arr element in the loop at arr.splice(0,1); and in the loop break condition i

» javascript

Date : November 24 2020, 03:01 PM , By : Mouhammad Hamsho

How to set queues manager configuration to 'optional'?

I wish did fix the issue. IBM MQ Technote "AMQ5540, AMQ5541 and AMQ5542, application did not supply a user ID and password, 2035 MQRC_NOT_AUTHORIZED" describes how resolve this issue.I would suggest you look at how to provide a valid username and pas

» development

Date : November 24 2020, 03:01 PM , By : Paul Shen

filter system for restaurant booking

This might help you In your code you are removing tables that that have less seats than the selected booking. While this will work what if the user selected eight people accidentally? If the user then corrected the selection there would still only be

» javascript

Date : November 24 2020, 03:01 PM , By : Kamal Sharma

Hide label in Crystal Report

it should still fix some issue You can create a new formula (e.g. countElement) with the following content:

» crystal-reports

Date : November 24 2020, 03:01 PM , By : Bejoy

What guarantees does zlib's inflate/deflate make about avail_in and avail_out?

may help you . If inflate() returns Z_OK or Z_BUF_ERROR, and avail_out is not zero, then avail_in is zero.Can you provide the compressed data in question?

» development

Date : November 24 2020, 03:01 PM , By : jagpreet singh

MariaDB - embed function to automatically sum columns and store result?

To fix this issue it is possible to store a function IN the table to automatically sum a group of columns and store the result in a final column? , Yes, it is possible. But is it worth it? It is simple enough to do

» development

Date : November 24 2020, 03:01 PM , By : Minghao Chen

I need to take database back up database name with date

To fix this issue I need to take daily database backups and add the date to the database name - something like this: Navigate_2017-10-20.bak. , Convert the Date to string and create the filename beforehand:

» sql-server

Date : November 24 2020, 03:01 PM , By : Muntai

Disable logging except in tests

Does that help logging.disable() will affect every logger (see https://docs.python.org/3/library/logging.htmllogging.disable).You could try something like this:

» python

Date : November 24 2020, 03:01 PM , By : Jamil Pointer

Freeing memory wrapped with NewDirectByteBuffer

it should still fix some issue You use JNI.newDirectByteBuffer, you can and you should free the memory manually, and do you clean up work at the same time. If you want it clean up automatically, what you need is monitor the object's life cycle. And i

» java

Date : November 24 2020, 03:01 PM , By : Pratyush Kumar

Writing json to file in s3 bucket

this one helps. Amazon S3 is an object store (File store in reality). The primary operations are PUT and GET. You can not add data into an existing object in S3. You can only replace the entire object itself.For a list of available operations you can

» python

Date : November 24 2020, 03:01 PM , By : Datta Tarse

Insert multiple rows from array

this one helps. If I convert the above query into mysqli, then will the code be below:

» php

Date : November 24 2020, 03:01 PM , By : William Shao

PHP : How to remove a duplicate array item ONCE

this will help As per the comment, check if there are more than one of the element you're searching for, then find and remove one of them.

» php

Date : November 24 2020, 03:01 PM , By : nik nikhil

how to add active class in framework nav menu when (add/edit) pages are opened

With these it helps I am using phalcon framework. I want to active parent menu when children are opened in the framework terminology,

» javascript

Date : November 24 2020, 03:01 PM , By : Lahiru Muthumal

Print the input box text as simple text instead of html tag

like below fixes the issue You can use html_entity_decode. It decodes the html tags and shows the text as it is.According to its documentation:

» php

Date : November 24 2020, 03:01 PM , By : bubbletea

Sorting numpy array created by laspy

Any of those help np.sort does not seem to support inplace sorting as far as i understand the documentation. np.ndarray.sort however does. So

» python

Date : November 24 2020, 03:01 PM , By : Amrit Kumar Sharma

Open an XML file through URL and save it

Hope that helps With Python 3, I want to read an XML web page and save it in my local drive. Also, if the file already exist, it must overwrite it. , I found a solution :

» python

Date : November 24 2020, 03:01 PM , By : Krishna Prasad Bhand

Trying to deploy firebase functions Deploy Error: Failed to configure trigger

hope this fix your issue i had the same problem, and it has now been resolved by the firebase team.from the firebase slack:

» firebase

Date : November 24 2020, 03:01 PM , By : Azhar

generics struct implementing protocol with associated type

I wish this help you The answer was pretty simple. I needed to constraint Key and Value in the struct. The following struct compiles as expected

» swift

Date : November 24 2020, 03:01 PM , By : ComeAgain22

Umbraco: Is there a way to get the list of folder under the Media (Physical Folder)

With these it helps You should loop through the folders in the filesystem instead of using the Umbraco service (which lists the database entries).Example

» asp.net

Date : November 24 2020, 03:01 PM , By : Sarah Alshehab

How do I turn off automatic workspace building in C++ Eclipse?

I wish this helpful for you Disable the building automatically in window, then restart Eclipse, and the disable operation will work.

» eclipse

Date : November 24 2020, 03:01 PM , By : Kar Dev

ggplot fills in data in the wrong order

fixed the issue. Will look into that further It's probably easier to use facet_grid instead.Also, refer to variables by name! So use test not dat[2].

» r

Date : November 24 2020, 03:01 PM , By : teqi

Synchronization with implicitwait() do not work, why?

I wish this help you I'm trying synchronization with selenium webdriver and something is not working with implicitlyWait(). , You have to wait that your element is clickable. Try adding this:

» java

Date : November 24 2020, 03:01 PM , By : Pratyay Ghosh

Qt Align QCheckBox to the top of the text

it helps some times I looking for a way to align the QCheckBox box on the top of the text. The text is very long and I would like it to be aligned with the first line. I think by default it is vertically centered with the text. This seems pretty easy

» qt

Date : November 24 2020, 03:01 PM , By : bananee dash

How to build a 2-level dictionary?

wish helps you Instead of using the literal construc, you should use the assign operator:

» python

Date : November 24 2020, 03:01 PM , By : Dennis Garces

Redirecting with react-router in a react redux app

wish help you to fix your issue I am assuming your project is browser based project. So , you can make use of if your website/app is hosted on a dynamic server. You can wrap it like :

» reactjs

Date : November 24 2020, 03:01 PM , By : vaibhav b

Join on large table getting slower

hope this fix your issue No! Do not break big tables into smaller ones. You already may have "too many tables". Instead, focus on indexing. Let's see SHOW CREATE TABLE and some of the important queries.

» mysql

Date : November 24 2020, 03:01 PM , By : kay a.

Inconsistencies in Firebase Firestore API

Does that help In designing APIs we try to balance adhering to platform idioms against being consistent across platforms. So this method naming was actually an intentional deviation. JavaScript and Go both commonly use short, concise method names, wh

» firebase

Date : November 24 2020, 03:01 PM , By : Chhavi Sahni

Wrapper around Java primitive types

help you fix your problem Why always data needs to be converted into bytes for serialization/de-serialization?The objective of serialization is to send data to somewhere outside your software (your hard drive or other software somewhere). Those proce

» java

Date : November 24 2020, 03:01 PM , By : JHan

Port a js map in dart

Hope that helps How can i port this const in dart? , You can do that with a class and constant static members:

» javascript

Date : November 24 2020, 03:01 PM , By : Talwa Valluvar

How to get value from select using javascript

will be helpful for those in need To get selected use $('group_2 :selected').val();you are making your code a little more complicated

» javascript

Date : November 24 2020, 03:01 PM , By : Jeff Staples

error installing scipy using pip on windows 10

hop of those help? I installed scipy in windows 10 from the whl file from http://www.lfd.uci.edu/~gohlke/pythonlibs/ through pip install command in python3.6.

» python

Date : November 24 2020, 03:01 PM , By : Isha Raulji

Audio won't be muted with JavaScript - removing audio tags with mutationobserver needed

like below fixes the issue Enumerate mutations and each mutation's addedNodes Enumerate node's child elements because mutations are coalesced during page loading using the superfast getElementsByTagName instead of the superslow querySelectorAll Don't

» javascript

Date : November 24 2020, 03:01 PM , By : luiz